常用激光介质膜的斜入射性能

本文给出了多层介质膜反射率与入射角的关系的计算机程序，并列出了部份常用激光膜片反射率-角度曲线。     

宣钢1260 m3高炉扩容大修改造设计

宣钢l260m^3高炉大修改造时将炉容扩大到l350m^3，对高炉本体系统设备及冷却系统、自动控制及检测系统进行了全面的改造更新，在炉腹、炉腰及炉身下部高热负荷区域采用铜冷却壁，取消炉身中上部铸铁冷却壁凸台，并采用薄内衬等先进、适用、可靠、成熟的技术。     

"立方形"破碎石的形成与破碎设备及流程的关系

1引言随着我国公路、机场、水电和高层建设的不断发展,通过对已出现的工程质量问题的分析与研究,各种混凝土、稳定土等中的石料的性质、大小规格、形状对其强度和使用寿命的影响是至关重要的,特别是在高等级公路的建设中为了保证路面的使用寿命,除对破碎石的性能指标要求外,对石料颗粒形状提出越来越高的要求,希望破碎后的各级石料中针、片状含量要少(<10%),业内人士已认识到破碎后石料产品的形状是越来越重要,这些都促使碎石集料生产单位和破碎设备生产单位的高度重视。对于破碎后各粒级石料颗粒形状的要求,取决于使用范围,各种工业都有各…     

用离散复镜像方法计算任意形状微带贴片的散射

采用离散复镜像方法(DCIM)计算微带结构的空间域格林函数，提高了计算阻抗矩阵的速度。采用三角矢量面元(RWG)基函数，模拟电流分布。由于三角形可以模拟任意形状的贴片，本文的方法可以准确地计算任意形状贴片的散射。数值结果证实了本文方法的有效性。     

Abstract Implementation of Algebraic Specifications in a Temporal Logic Language

A formal technique for incorporating two specification paradigms is presented,in which an algebraic specification is implemented by a set of abstract procedures specified in pre and post-condition style.The link between the two level specifications is provided via a translation from terms of algebraic specifications into temporal logic formulae representing abstract programs.In terms of translation,a criterion for an abstract implementation satisfying its specification is given,which allows one to check the consistency between the two levels of specifications.The abstract implementations can be refined into executable code by refining each abstract procedure in it.It is proved that the satisfication relation between a specification and its implementations is preserved by such refinement steps.     

混凝土预制板防渗渠道技术探讨

介绍了混凝土预制板防渗渠道施工过程及施工方法,并提出施工中应注意的问题。     

基于图像内容的多子波去噪

本文介绍了多子波变换的一般理论及OPTFR多子波的性质,通过改进其一阶平衡器,避免了预滤波,从而简化了运算。在将OPTFR多子波用于图像处理时,采用了一种基于图像内容的阈值方法,实验结果表明,其去噪效果优于CL多子波及一般的阈值方法。     

五氧化二钽薄膜的制备及其I-U特性

本文利用脉冲直流反应磁控溅射的方法制备了五氧化二钽 (Ta2 O5)薄膜 ,俄歇电子能谱仪测试了薄膜的成分含量 ,椭偏仪测试了Ta2 O5薄膜的厚度和折射率 ,XRD分析了薄膜的晶体结构 ,并且分别研究了氧气含量、基底温度等成膜工艺对薄膜的影响。研究结果表明薄膜的成分主要是由氧气含量决定的。利用金属 绝缘体 (介质膜 ) 金属 (MIM)结构初步对Ta2 O5薄膜进行了电学性能的测试 :皮安电流电压源测试了薄膜的I U特性 ,制备出的薄膜折射率在 2 1～ 2 2 ,MIM的I U特性曲线显示了较好的对称性和低的漏电流密度     

Crystallographic shear planes in nanocrystalline SnO2 thin films by high-resolution transmission electron microscopy

Atomic structures of crystallographic shear planes (CSPs) in nanocrystalline thin films of semiconductor SnO₂ were investigated by high-resolution electron microscopy. The films were prepared by electron beam evaporation in high vacuum (10^–6 torr) and followed by annealing in synthetic air at 700 °C for 1–2 H. CSPs with the displacement vector of [1/2 0 1/2] were observed in the planes parallel to (¯101), (110) and (¯3¯21). Most of the CPSs were found to terminate or interact with each other within SnO₂ crystallites. Partial dislocations exist at terminal places of CSPs or along intersecting lines of CSPs. CSP steps were also observed. Structural models of these defects have been proposed. Based on analysis of experimental data, it has been suggested that the Sn/O ratio at CSPs which are not parallel to their displacement vector, at cores of partial dislocations and at CSP steps, is higher than that of the perfect structure, that is, these defects are able to provide extra free electrons with the films.     

多功能超高速计数器

脉冲信号计数是最简单的数据获取工作和最基本的测量方法。在许许多多高科技领域中,对计数器(Counter)计数分辩率提出很高要求。当前,核物理上应用的计数器都有计数率较高(最高为200MHz),结构复杂,价格昂贵的缺点。本文报导我们最新研制的一种计数率为500MHz的超高速计数器,后级采用Intersil公司生产的通用计数器电路ICM7216B,只需外接少量元件就可构成最简单多功能超高速计数系统。